Built Ford Tough

My wife got a 1998 Mustang in high school.  I met her 3 years later and started taking care of old blue.  9 years and 204XXX miles later she is still going strong.  I drive roughly 60 miles a day(roundtrip back and forth from work).  The West Texas Wind and sand has given her a few blemishes but I love her and she is still going strong as my daily driver.  I take pride in knowing that I’ve done all the maintenance myself.  This car has ensured my faith in a Ford.   

Related Tags
Built Ford Tough
i
maintenance
mustang
tough

Have a story of your own to tell?
Submit Your Story
0 COMMENTS ON THIS STORY
You're the first to comment on this. Have at it!
This discussion is missing your voice.

Your comment has been received and will be reviewed.
Thought of something else? Add another comment.
Comments are moderated in accordance with the
Ford Story Rules of Conduct.
Mustang
Mustang
Share the Love.
Choose the badge that speaks to you and take the first step into the amazing world of Ford Social.
Learn More >
Check out the family of badges on your dashboard.
View your Dashboard
Related
Your Ideas
OK Guys working on a Diesel Truck Engine is a pain! We are running off good mechanics because of the long days involved in just getting at the Engine to remove and head or worst. Suggestion;  why not get the engineers to design a frame that will slide out to allow easy access without removing the cab of the truck?  Yes I know what that would involve but it will save a lot of time at the shop, make customers happy with shorter turn around time and the mechanics will like it better as well.  I used to think a lift off/ tilt front end assembly like the Big trucks would help but with the engine so far back under the dash ot would not really help, unless you did a compination of both ideas.  Allow the frame to be unbolted and the slide the entire front of the truck foward to allow easy access to repair the engine assembly.  A boxed frame section with a boxed frame inside bolted very well but when unbolted the entire assembly would move foward. Wheels, and all.  Just disconnect the steering colum and remove the bolts in the frame section that is made to slide foward. brake lines and wiring and fuel lines are designed to allow for the foward movement.  The entire process of moving the assembly foward should be designed to allow a mechanic 30-45 minutes to access the Engine.  Yes the drive shaft will have to be removed or let the yoke slip out and then reinstall when sliding everything back together. This can be done with some good old Ford know how. Built Ford Tough. Ok the ball is in your court, lets do it.
Diesel Truck Engine Access
By: Ken A.
GO TO IDEA
Rate and post ideas here.
Submit Your Story
Flickr
Vintage Mustang Ad
Caffeine & Cobras Event At Chicago Auto Show
Caffeine & Cobras Event At Chicago Auto Show
2011 Ford Mustang GT
2013 Ford Mustang at Maxim After Party
YouTube
Jamal Hameedi Talks About the 2011 Shelby GT500
800000 Mile Mustang
Return of the Boss 302 Mustang
Promo Promo Promo
Register Now
SOCIAL NETWORKS
|
RSS
|
|
EVENTS
|
BLOGS
|
ABOUT